Grease Trap and Interceptor Removal
A building company hired New Life Restorations to oversee the removal of a grease trap and interceptor reticulation system (2x 3000L tank) located in Brisbane's CBD, and to clean the area of any possible grease contamination, using pressure cleaning and HEPA air scrubbers.
New Life Restorations was called to oversee the removal of a gas trap and interceptor reticulation system, to make sure that containment barriers were up to standard, and to contain and remediate any grease contamination.
First attending the site, New Life Restoration technicians installed two HEPA filtration units, to set up a negative venting system. Adjustment to the containment area was also done where appropriate.
Containment barrier set up
HEPA filtration unit set up
#Sewage Gas Removal
Afterwards, New life helped oversee the deconstruction and removal of components of the gas trap and interceptor system. This involved decontamination cleaning rinse to the disassembled units before removal off site. The technicians also used a pressure truck mount system to pressure clean any decontaminated areas due to spills.
Component and Contamination spill requiring Pressure clean
Lastly, after a period of HEPA air scrubbing, to ensure the area was safe for further works, New Life Restoration used a photoionizer detector and gas analyser, to determine the air quality of the area.
Air Quality reading withing acceptable limits
Air quality monitoring showed all results as being within acceptable limits. The containment barrier was taken down and the HEPA filtration units removed offsite. The area was now safe for further works to occur. If you have any grease clean up enquiries or are interested in our range of specialised cleaning, please click on the link below.