Zefon Bio Tape Packs (Pack of 10) Bio-Tape provides a standardized sampling method for quick determination of mould, microbial, bioaerosol, and inorganic dust contamination. Buy or Hire Now About This Product The Bio-Tape consists of a flexible plastic microscope slide with a pre-defined adhesive area. A centre-line marker on the slide aids the user in locating the centre when taking a sample. That allows for you to assist our laboratory analyst in finding the centre of each sample. Each slide is provided with a unique serial number for unique tracking and packed in a slide mailer to prevent cross contamination NEW – Bio-Tape is now compatible with both optical microscopy and scanning electron microscopy (SEM). This provides the ability to perform optical and SEM analysis along with an x-ray analysis on the exact same air surface sample and exact same particles. Please note Bio-Tape products have a limited shelf life Features: Provides sample consistency and uniformity Easier to handle than tape Individually serialised for tracking Prevents cross contamination Eliminates problems of placing tape in a zip bad, or chance broken slides during transport Requires less laboratory preparation time Ideal for mould sampling and testing Compatible with both optical microscopes and scanning electron microscopy (SEM) Sampling Procedure: Remove slide from the provided slide mailer Document the sample location on the slide’s label and complete any required documentation for the laboratory  Peel off protective liner from slide to expose adhesive Place slide with the adhesive side down on the surface to be sampled (Use the centering line to orient the adhesive over the exact sample location desired) Carefully and gently press down to ensure contact is made. Don’t press it down hard. The adhesive sticks very easily so it only needs to be pressed very lightly Carefully remove the slide from the surface and place it into the slide mailer. Do Not replace the plastic liner labeled “Peel” Send back the slide to the laboratory for analysis Note: Multiple samples should be collected from both suspected area and a non-suspected area as a control Buy or Hire Now

Zefon Air-O-Cell Packs (Pack of 10) The Air-O-Cell is designed for fast collection of a wide range of airbourne aerosols including mould spores, pollen, insect parts, skin cells, fibres, and inorganic particulate matter. Buy or Hire Now About This Product Air-o-cell is a simple to use tool for rapid collection of a wide range of airbourne particulate: Bioaerosols: mould spores, pollen, insect parts, and skin cell fragments Fibres: Asbestos, fiberglass, cellulose, clothing fibres, and synthetics Inorgranic Particulate: Ceramic, fly ash, copy toner, oil droplets, and paint Other opaque particulates: Products of combustion, rust, and salts The Air-o-cell is a unique air sampling cassette specifically designed for the rapid collection of a wide range of airbourne aerosoles, including mould spores, pollen, insects parts, skin cell fragments, fibres (e.g. asbestos, fibreglass, cellulose, clothing fibres, etc.) and inorganic particulate (e.g. ceramic, fly ask, copy toner, etc.) The Air-o-cell collects both viable and non-viable sample specimens, providing a much wider overview of potential allergens and contaminants rather than conventional sampling techniques. The Air-o-cell operates upon the principle of inertial impaction. Particulate filled air is accelerated as it is drawn through the cassettes tapered inlet slit and directed towards a small slide containing the collection media, where the particles become collected and the air flow continues out the exit orifice. The adhesive nature of the collection media prevents the collected particles from blurring or being washed off during the laboratory staining process, and eliminates sample loss from movement during handle and shipment. After sampling is completed, the cassettes are sent to a laboratory, where the slides are removed and put under a direct microscopic analysis that is performed immediately after. The collection media is compatible with a wide range of biological stains refractive index oils, allowing a direct analysis of organic and inorganic particulates. The Air-o-cell can be used with any off the shelf area sampling pump capable of drawing 15LPM open flow. The small size makes the Air-o-cell unit suitable for use in confined or restrictive spaces. With its engineered design, user friendly, and compatibility with typical everyday area sampling pumps, All bioaerosol samplers are not the same and they all will provide different results. The data they provide is a reflection on your reputation and Zefon wants you to know the difference between them. Buy or Hire Now

Environmental Express IAQ 15 Connect 18mm H × 7mm W × 10mm D A sampling pump that you can carry anywhere you want, Environmental Express IAQ 15 Connect is a compact portable sampling pump which lets you use it for a number of hours because of its battery life. It is also specifically designed to be used with Air-O-Cell® and Via-Cell® cassettes. BONUS – 3x Mould Samples analysed for FREE. Valued at $231, Valid for new customers only and for businessses that conduct mould inspections. Limit of 1 free trial per customer / company. IAQ Direct reserves rights to end promotion at any time.BONUS – Comes with 10x Air-O-Cell® Cassettes. Valued at $88. Buy or Hire Now Specifications Min Airflow15 LPM About This Product Features: Most compact design available – allows access to crawl spaces, HVAC vents and other confined sampling areas Long lasting battery – up to 99 five-minute samples on new, fully charged battery IAQ specific calibration – the only sampling pump with calibration verification and accuracy at 15 L/min Easy to use – LED screen with button operated navigation and on-demand access to all sampling controls Fit for purpose sampling modes – various sampling durations (1, 2, 5, or 10 minutes) for any sampling setting Automatic event logging – Keep track of critical sampling data with automatic data logging and blue tooth connection IAQ sampling app control Retrieve Sampling Records with the IAQ 15 App – The IAQ 15 Connect pairs with our IAQ 15 app, available on the Apple App Store and Google Play. Using the app, via Bluetooth, connect to the pump to retrieve and export multiple records, including location, sampling type, cycle count, run-time, calibration status, RFID information, and more. What is Included: IAQ 15 Connect pump 10 Air-O-Cell cassettes Air-O-Cell air flow indicator Battery pack Battery cover key AC power adapter Carrying case Buy or Hire Now

ATP Surface Swabs (25 Pack) Discover the most advanced ATP and environmental monitoring platform available. The Hygiena ATP Monitoring System combines state of the art photodiodes with superior liquid stable chemistry and the patented Snap Valve test device produces the most accurate ATP Monitoring System Available. Buy or Hire Now About This Product ATP Tests Devices Featuring liquid-stable chemistry, pre-moisten swab tip and patented Snap valve technology. UltraSnap™ UltraSnap™ is a user-friendly, all-in-one ATP sampling test used with Hygiena™ luminometers. The UltraSnap™ Surface ATP Test is a key component to Hygiena’s cleaning verification solutions. It works hand-in-hand with the EnSURE Touch and SystemSURE Plus to provide superior repeatability, linearity, sensitivity, and accuracy over other ATP systems. Several innovative design features enable UltraSnap™ to outperform its competition. Learn more about these features below. Patented Snap-Valve Activation The patented Snap-Valve technology enables accurate results with less variation. It allows the use of a precise honey dipper for precise sample collection and eliminates friction during the activation step. With competitor solutions, the sample collection surface must break through a foil seal, removing a portion of the collected sample. Less is More We believe less is more. Competitor swabs have on average 2x more parts than the Hygiena™ Swab. Fewer parts in the device mean less room for error from manufacturing variance and less raw material costs. 100% Recyclable All Hygiena ATP test devices are 100% recyclable. Quick CIP sanitation check With AquaSnap™ Total, sanitation teams can check the cleaning efficiency of CIP systems quickly. Simply sample the water from the last wash of the CIP cycle, activate the swab, and read the results in your Hygiena™ luminometer. If ATP is present in the water, the cleaning cycle is not properly removing residue and the surfaces are still dirty. Buy or Hire Now